Construction waste crusher

In the construction of garbage crushing process, by the construction waste in the process of crushing, due to the physical properties of the material itself, usually using two crushing, broken product size 0-10mm accounted for about 25%. In order to improve the production of fine aggregate, the use of two crushing for the three crushing, so that most of the broken products to 0-10mm below, is a very effective means.

However, in the specific technical process, encountered a complex process, process layout difficulties, power consumption, investment is too large and so on. To this end, SBM Engineering Technology Co., Ltd. on the basis of the original equipment, after several tests to improve the introduction of DPF series of construction waste crushing equipment. The equipment can achieve multi-level crushing for the first-order crushing, but also to meet the needs of grain-structured, broken material size is very suitable for the production of environmentally friendly brick raw materials for the construction of aggregate waste recycling process to provide a complete solution. In the physical properties of the material itself, usually using two-stage crushing, broken product size 0-10mm accounted for about 25%. In order to improve the production of fine aggregate, the use of two crushing for the three crushing, so that most of the broken products to 0-10mm below, is a very effective means.

However, in the specific technical process, encountered a complex process, process layout difficulties, power consumption, investment is too large and so on. To this end, SBM Engineering Technology Co., Ltd. on the basis of the original equipment, after several tests to improve the introduction of DPF series of construction waste crushing equipment. The equipment can achieve multi-level crushing for the first-order crushing, but also to meet the needs of grain-structured, broken material size is very suitable for the production of environmentally friendly brick raw materials for the construction of aggregate waste recycling process to provide a complete solution.

construction waste crusher

Performance advantages of DPF construction waste crusher

The construction work of the owner of the construction waste treatment project has proved that the SBF production of the SBM construction grinder is suitable for: 1. Construction waste recycling brick 2. Construction waste Recycled concrete 3. Construction waste regeneration Stabilized soil aggregate 4. Construction waste regeneration mortar Products 5. Subgrade aggregate 6. Backfill and green soil. The construction of garbage crusher in the construction of garbage crushing process, has the following advantages:

  • 1, variable three broken into a broken, simplify the process;
  • 2, the material is fine, less grinding less, good grain forming;
  • 3, semi-open nesting system, suitable for crushing a small amount of reinforced construction waste;
  • 4, in the leveling area of the liner design of the steel groove, the material mixed with the steel after passing through these grooves were stuck out and separated;
  • 5, supporting power is small, low power consumption, energy saving and environmental protection;
  • 6, simple structure, easy maintenance, reliable operation, low operating costs;

Application of DPF Construction Waste Crusher in Fixed Building Waste Production Line

After a long period of research, SBM has developed a program to process construction waste into recycled aggregate concrete, new wall materials, and road fillers, using complete sets of crushing and screening equipment. Which DPF construction waste crusher is often used in fixed construction waste production line to DPF construction waste crusher in Shanxi a construction waste disposal plant (to protect customer privacy, the company name to a company instead) in the actual production situation to explore Application of DPF Construction Waste Crusher in Fixed Building Waste Production Line.